The Vanquish RCV AR60 VVD Axle Shaft Set is an officially licensed RCV replica axle that fits Axial AR60 Axles. Features: Replaces stock axle shafts with a strong chromoly VVD style joint RCV style cap for scale realism, is used to retain standard AR60 VVD pin Large 8x15x5mm inner bearing (included) increases strength over stock 10x15x4 bearing 6mm stub axle increases the strength through the pin on the stub axle, uses a 5mm threaded stub (requires 8mm nut driver) Aluminum 12mm hexes are included to fit with 6mm stub, hex pins also included 6x11x4 bearings included for outer knuckle bearing Some rubbing may occur initially at the link mount screws due to larger diameter shafts. May require slight grinding of screws that hold lower link mounts. NOTE: Intended for use in AR60 axles with locked differentials. If using an open differential, the axle tang will need to be shortened slightly.