BowHouse RC Axial SCX10 III SVT Panhard Reinforcement Bracket #BSX-0070

The BowHouse Axial SCX10 III SVT Panhard Reinforcement Bracket was designed to add strength to the panhard mount on the stock AR45 portal axle housing. BowHouse designed this panhard reinforcement bracket to bolt right onto the stock housing, allowing easy installation with no modifications. Plus, it's precision machined from aluminum, so it provides the strength needed to stand up to the abuse your rig will see on the trails or on rocks.

Installation Notes:

• Start by removing the right front tire. Then remove the screw securing the right front shock and lower link to the axle housing.
• Unscrew the panhard mount from the axle housing.
• Snap the panhard reinforcement bracket onto the front of the housing truss (thread lock recommended).
• Use an M3 x 8mm flat head screw to secure the bracket to the axle housing through the hole in the axle housing truss (thread lock recommended).
• Use an M3 x 20mm flat head screw to attach the panhard to the axle (do NOT use thread lock). Make sure the screw threads all of the way into the panhard reinforcement bracket.

Includes:

• Panhard reinforcement bracket (1)
• M3 x 8mm flat head screw (1)
• M3 x 20mm flat head screw (1)